 This category does not contain any products at this time.
|
 |
Avoid chipping and cracking while drilling Acrylic material!
KnKut Performance Acrylic Point Drills feature a chip-free point that is ground to a 60-degree angle to avoid chipping and cracking of acrylic material. This bit also includes a 0-degree rake angle which keeps the drill bit from grabbing when it breaks through plastic, acrylic, laminate or Plexiglas.
Sizes over 1/4" have 1/4" Shanks. |
| Diameter |
EDP # |
Decimal
Equivalent |
Flute
Length |
Overall
Length |
| 1/8 |
KK10-1/8 |
0.1250 |
1-3/8 |
2-1/2 |
| 5/32 |
KK10-5/32 |
0.1562 |
1-3/4 |
2-7/8 |
| 3/16 |
KK10-3/16 |
0.1875 |
2 |
3-3/16 |
| 1/4 |
KK10-1/4 |
0.2500 |
2-15/16 |
3-9/16 |
| 5/16 |
KK10-5/16 |
0.3125 |
1-5/8 |
3-5/16 |
| 3/8 |
KK10-3/8 |
0.3750 |
1-15/16 |
3-5/8 |
| 7/16 |
KK10-7/16 |
0.4375 |
2-3/16 |
4 |
| 1/2 |
KK10-1/2 |
0.5000 |
2-7/16 |
4-1/4 | |
