|
|
|
|
|
© R,W. Thompson, Inc. 2007
|
|
|
|
|
|
|
|
|
|
 |
KnKut Spot Weld Drills are designed to effectively cut auto panel spot welds. Made of Cobalt Steel, the high red hardness permits speeds 30% greater than high speed steel spot weld drills. Cobalt Steel is substantially more abrasion resistant, resulting in a very long lasting cutting edge.
|
| KnKut Spot Weld Drills have a spur point, designed to cut through the weld on one panel while leaving only a slight penetration into the second panel. The modified point is chip resistant. |
|
|
Diameter
MM |
EDP # |
Decimal
Equivalent |
Flute
Length |
Overall
Length |
Single
End |
6.50 |
KK3-6.5SW |
.2500 |
.5000 |
1.7500 |
Single
End |
8.00 |
KK3-8.0SW |
.3125 |
.5000 |
1.7500 |
Single
End |
10.0 |
KK3-10.0SW |
.3750 |
.5000 |
1.7500 |
Double
End |
6.50 |
KK3-6.5TSW |
.2500 |
.5000 |
3.6200 |
Double
End |
8.00 |
KK3-8.0TSW |
.3125 |
.5000 |
3.6200 |
Double
End |
10.0 |
KK3-10.0TSW |
.3750 |
.5000 |
3.6200 |
Combination |
SET |
6KK3-SW |
The Above |
6 Pcs. |
in a SET |
|
|
|
|
|
|
|
